An NFL Nut.

Football stuff.

Clip Helmet

Tips for Tiny Triathlon Transition Times

What if there was a way to shave seconds, or even minutes, off your race times without doing a thing to your current training regimen? Sounds too good to be true, right? Wrong.

Practicing and mastering transitions is by far the easiest way to shave time off your triathlon races. With how competitive age group racing has become, even a few seconds could be the difference between a medal around your neck, or a sour taste in your mouth. Lets look at five things you can do to speed your way through T1 and T2 and gain time on your competition.

Transition tip #1: Practice!

It does not matter if you know exactly what to do and have ran through it 1,000 times in your head. If you are in the middle of a race with your heart pounding out of your chest, nerves racing, and blood pumping, 95% of the time you will screw up something if you do not practice it.

You need to practice unzipping and pulling off your wetsuit in a fatigued state, taking your bike/run shoes off and on, putting on your helmet and sunglasses, getting on and off your bike safely and quickly, etc. Even simple motor tasks become difficult when you are under pressure. Developing muscle memory through practice will make it second nature for you to perform these tasks in any situation, even under extreme stress.

Transition tip #2: Lube up

If you are wearing a wetsuit in your race, which you should be, it is very important to be able to take it off quickly in transition. If you struggle to get the thing off, it will negate any advantage you gained in the swim by wearing it.

Put some Body Glide or baby oil around your calves/ankles as well as your wrists/forearms. This will help the wetsuit slide off your body without you having to struggle. Don’t be the person wiggling and thrashing around on the ground after they fell over trying to get their feet out of the wetsuit. Along with lube, a proper fitting wetsuit is also important.

Transition tip #3: Place equipment properly

If you are one of those people that bring a king size beach towel and have all your stuff strewn all over, just stop it. You only need something about the size of a small workout towel for your gear. Having everything compact and close together will eliminate wasted time searching and moving around to get things. Your fellow racers will thank you too.

Your towel should be organized like this from top to bottom:

-Running shoes with socks (optional) on top of your shoes. Not wearing socks will save a few seconds, but don’t do it unless you have been trained without socks without any problems. If you wear a hat during the run, place it on top of your shoes so it’s the first thing you put on. If you wear a nutrition belt you can put that on top of your shoes also. Just make sure the straps are wide open so all you have to do is grab, wrap, and snap. Some people put their race belt on under their wetsuit so they don’t ever have to mess with it.

-Cycling shoes (if you don’t strap them to your bike) with your helmet resting on top with straps pulled out and fully extended.

-Sunglasses and race belt should go inside your helmet in a position that makes them easy to put on without fumbling around.

Some people put their helmet on top of their bike. This works well, until the person next to you bumps the bike rack or your bike and your helmet falls off and rolls away from your transition area.

Transition tip #4: Clip your cycling shoes into your bike before the race

Disclaimer: This is the tip that requires the most practice to truly master. Please do not attempt unless you are confident in your athletic ability and bike handling skills.

The technique of having your bike shoes already clipped in before the race will save time by allowing you to just put your helmet on, grab your bike, and go. You will run out of transition barefoot, mount your bike, and pedal with your feet on top of your shoes. Once you get moving on a flat stretch of ground, well clear of the mount line, you can bend down and strap each foot in. Make sure there are no riders around you and you are not on an uphill or steep downhill section. If you have to ride a while before you find a good flat stretch of ground, no problem. You’re still gaining ground on people trying to put their shoes on in transition and run with their clunky cleats.

To keep your shoes from dragging on the ground, put a thin rubber band through the loop on the heel of one shoe and hook it to your quick release lever on the rear wheel. This will keep your shoes in a fixed position until you start pedaling and the rubber band snaps.

Transition tip #5: Don’t sit. Stand or kneel.

The goal in transition is to save time; there is no place for sitting in a race. Sometimes standing can also be difficult when you’re tired and/or dizzy after the swim. When you dip your head down to put your shoes on and pick up any other gear you need, a massive head rush may ensue and you could end up taking an unintended nap for a bit.

An alternative method is to get down on one knee like you are proposing to the bike rack, place your first shoe on the front foot, then switch and do the same to the other side. You will need to put another towel in front of your transition area to keep your knees from getting scraped up.

Hopefully these several tips will help you save some time in transition and give you a small edge. If you’ve ever tried to run someone in your age group down at the finish, but can’t quite bridge the gap, a few seconds saved in transition could have made the difference. These are not the only time saving strategies out there. Feel free to be creative and experiment in training to find what works for you. Happy training and racing!

About the Author

Jarrett Pflieger is a USA Triathlon Level 1 certified coach and facility director of Triathica, a triathlon training center in Orange County, CA. For more tips and triathlon training advice, please visit www.triathica.com/offers/newsletter_offer_001.html. If you are looking for a training plan or coaching, check out Triathica's website at www.triathica.com.

Wats The Clip On The Front Of Americans Helmets?

I see they hav a clip on there helmets in iraq etc.. Just wondering what it is used for..

To attach NVG's

GoPro HD HERO camera: Mountain Bike Clip

Helmet Clip $30.06 Add this stylish Helmet Clip to your wardrobe or give it as a great gift!

XD Helmet Screw Set with Clip $6.95 Arai XD Helmet Screw Set with Clip

Helmet $10 Helmet

Ovation Deluxe Schooler Helmet $50.95 The Ovation Deluxe Schooler Riding Helmet is the ideal lesson helmet or helmet for multiple riders.  The easy adjust dial allows to the helmet to quickly and easily fit a number of riders with a snug fit. The Ovation Deluxe Schooler Riding Helmet features: Extra strong adjustment teeth for added life High flow vents to keep you cool Easy to clean rubberized finish Removable washable liner Removable breakaway visors Exclusive YKK adjuster clip and buckle that avoids the rider's face to prevent discomfort   The Ovation Deluxe Schooler Riding Helmet is SEI Certified to ASTM F1163-04A & CE Certified to European EN 1384 Standards

Lami-Cell Sport Riding Helmet $98.95 The Lami-Cell Sport Helmet is an innovative multi-discipline safety helmet that's engineered for schooling trail riding and competition.  This ultra lightweight helmet features the best in comfort fit and protection. This helmet offers ten top vents and a soft washable mesh lining for ultimate airflow and comfort.  The dial fit band and three-point adjustable harness with durable YKK clip closure ensures an easy perfect fit for every rider and hairstyle. And of course the dependable Lami-Cell Sport Helmet is rigorously ASTM/SEI certified.

Ovation Competitor Helmet $69.95 Lightweight and low-profile the Ovation&#8482 Competitor Helmet gives you all the protection you want and need without the bulk.  With all the modern features this is a great helmet for competition or everyday riding. The Ovation&#8482 Competitor Helmet features: Velvet texture flocked shell Easy adjust dial for a snug fit Extra strong adjustment teeth for added helmet life High flow vents to keep you cool Removable Coolmax washable liner Rounded fixed visor Exclusive YKK adjuster clip and buckle are positioned to stay off of the rider's face for comfort SEI certified to ASTM F1163-04A & CE certified to European EN 1384 standards

3M OHamp;ESD 1425290159R01 Clip FMining Helmet Cord $21.79 3M is fundamentally a sciencebased company. We produce thousands of imaginative products and we re a leader in scores of markets from health care and highway safety to office products and abrasives and adhesives. Our success begins with our ability to apply our technologies often in combination to an endless array of realworld customer needs. Of course all of this is made possible by the people of 3M and their singular commitment to make life easier and better for people around the world.. Used With: Airstream. AS600 For Miners Lamp Cord. Type: Clip. Quantity: 1 per pack.

Ovation Sync Riding Helmet $64.95 Ideal for all schooling occasions the Ovation Sync Riding Helmet has all the necessary features to keep you cool while you ride.  The easy adjust dial in the back will ensure that you are fitted snuggly and securely. The Ovation Sync Riding Helmet features: Extra strong adjustment teeth for added life High flow vents to keep you cool Easy to clean rubberized finish Removable washable Cool-max liner Removable breakaway visors Exclusive YKK adjuster clip and buckle that avoids the rider's face to prevent discomfort   The Ovation Sync Riding Helmet is SEI Certified to ASTM F1163-04A & CE Certified to European EN 1384 Standards.

Ovation Extreme Riding Helmet $76.95 The Ovation Extreme Riding Helmet is the ultimate in extreme comfort in a schooling helmet  The In-Mold design fits like a glove and the features that accompany this helmet make it not only comfortable but durable as well. The Ovation Extreme Riding Helmet features: Extra strong stainless steel air vent mesh Easy adjust dial for a snug fit Extra strong adjustment teeth for add life High flow vents to keep you cool Easy to clean rubberized finish Removable washable Cool-max liner Removable breakaway visors Exclusive YKK adjuster clip and buckle that avoids the rider's face to prevent discomfort The Ovation Extreme Riding Helmet is SEI Certified to ASTM F1163-04A & CE Certified to European EN 1384 Standards

VFX-W Solid Helmet $417.59 Shoei VFX-W Solid Helmet Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets, the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection, form-fitting comfort, cooling ventilation and components that are easy to care for. Features: Advanced Integrated Matrix Plus (AIM+) construction combines high performance fibers with organic fibers to create a shell structure that is lightweight, rigid and resilient Four shell and five liner sizes present increased fit options that help to comfortably fit most head sizes Aerodynamic properties are maximized through extensive wind tunnel and rider testing Front intake vents combine with rear vents and a neck outlet vent to maximize flow-through ventilation The helmet interior is constructed with a comfortable, Max-Dry material that absorbs and discharges moisture two times faster than traditional nylon Cheek pads, upper liner and chinstrap covers are easily removed for cleaning and/or replacement Cheek pads are available in optional sizes so that each rider can personalize their fit Aggressively shaped Sleek Visor provides incredible airflow for reduced drag Visor is easily installed or removed with the use of three external screws Removable, washable and replaceable Sleek Mouthpiece filter Matte black anti-reflection for underside of visor is included (white and graphic models only) Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft, velvety fabric with drawstring closure Shoei products can only be shipped to U.S. customers View the MotorcycleUSA.com review of the Shoei VFX-W Helmet here: Shoei VFX-W Off-Road Helmet Review

Clip $17.99 Chariklia Zarris Clip - Art Print

IRH Elite Ultra Helmet $243.95 With the IRH Elite Ultra Helmet designer Frank Plastino has taken his best-selling helmet and added a sporty rugged option that features a smooth leather covering and matte-finished vents.  Not only does the Elite Ultra make riders look cool it keeps you feeling cool and comfortable as well. IRH’s innovative low-profile geometry and a ventilated wrap-around harness give the Elite Ultra a streamlined modern look. Top right left and rear vent ports also provide optimal air intake and cooling. The interior of the Elite Ultra is mesh with a padded CoolOn lining that wicks moisture away from the rider’s head. Small foam pads across the inside of the helmet combined with its ultra-lightweight construction add to the supreme comfort of the Elite Ultra. The harness has a clip closure adjustable chin-strap and a soft fleece chin pad that is removable for washing. ASTM F1163.04a/USA/SEI/EN-1384/CE Mark Europe.

VFX-W Salute Helmet $552.59 Shoei VFX-W Salute Helmet Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets, the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection, form-fitting comfort, cooling ventilation and components that are easy to care for Features: Advanced Integrated Matrix Plus (AIM+) construction combines high performance fibers with organic fibers to create a shell structure that is lightweight, rigid and resilient Four shell and five liner sizes present increased fit options that help to comfortably fit most head sizes Aerodynamic properties are maximized through extensive wind tunnel and rider testing Front intake vents combine with rear vents and a neck outlet vent to maximize flow-through ventilation The helmet interior is constructed with a comfortable, Max-Dry material that absorbs and discharges moisture two times faster than traditional nylon Cheek pads, upper liner and chinstrap covers are easily removed for cleaning and/or replacement Cheek pads are available in optional sizes so that each rider can personalize their fit Aggressively shaped Sleek Visor provides incredible airflow for reduced drag Visor is easily installed or removed with the use of three external screws Removable, washable and replaceable Sleek Mouthpiece filter Matte black anti-reflection for underside of visor is included (white and graphic models only) Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft, velvety fabric with drawstring closure Shoei products can only be shipped to U.S. customers

VFX-W Dissent Helmet $552.59 Shoei VFX-W Dissent Helmet Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets, the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection, form-fitting comfort, cooling ventilation and components that are easy to care for Features: Advanced Integrated Matrix Plus (AIM+) construction combines high performance fibers with organic fibers to create a shell structure that is lightweight, rigid and resilient Four shell and five liner sizes present increased fit options that help to comfortably fit most head sizes Aerodynamic properties are maximized through extensive wind tunnel and rider testing Front intake vents combine with rear vents and a neck outlet vent to maximize flow-through ventilation The helmet interior is constructed with a comfortable, Max-Dry material that absorbs and discharges moisture two times faster than traditional nylon Cheek pads, upper liner and chinstrap covers are easily removed for cleaning and/or replacement Cheek pads are available in optional sizes so that each rider can personalize their fit Aggressively shaped Sleek Visor provides incredible airflow for reduced drag Visor is easily installed or removed with the use of three external screws Removable, washable and replaceable Sleek Mouthpiece filter Matte black anti-reflection for underside of visor is included (white and graphic models only) Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft, velvety fabric with drawstring closure Shoei products can only be shipped to U.S. customers

Shoei VFX-W Malice Red Helmet $552.59 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Shoei VFX-W Matte Black Motocross Helmet $429.29 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Shoei VFX-W Black Motocross Helmet $417.59 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Ovation Deluxe Schooler Helmet Medium/Large Black $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Medium/Large Blue $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Medium/Large Purple $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Small/Medium Black $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Small/Medium Blue $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Small/Medium Purple $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

X-Twelve Helmet $613.79 Shoei X-Twelve Helmet Born from racing, the all-new X-12 combines Shoei's 50 years of helmet building experience with the very latest technology and most advanced materials to bring you the racing helmet of the future. Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback Dual layer EPS liner enhances impact absorption and ventilation Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes Positioning and separation from the ventilation system maximize the Aero Edge Spoiler 2 aerodynamic properties Impact absorbing EPS liner throughout the entire chin bar Ventilation System Air Scoop 3 intake vent is positioned to maximize air volume into the helmet interior Top Outlet vent is separate from the Aero Edge Spoiler 2 allowing it to be positioned for optimum flow-through ventilation Racing inspired Side Extractor Vents combine with the chin bar lower air intake to reduce shield fogging and increase ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient 3D Max-Dry Interior System The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Comfortable, Max-Dry helmet lining material quickly dissipates moisture within the helmet interior E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet, enabling the helmet to be more easily removed from the head Eyeglass compatible interior Standard Chin-Strap Clip Neatly secures chin strap CW-1 Shield and Q.R.S.A. System Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Optional, CWF-1 two-dimensional racing shields with tear-off posts are available Scratch-resistant coating 99.9% protection from harmful UV A & B rays Optional, CW-1 Pinlock? prepared shields are available to accommodate Pinlock? Fog Free Inserts A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop the shield open to increase airflow Shoei products can only be shipped to U.S. customers

X-Twelve Laseca Helmet $727.19 Shoei X-Twelve Laseca Helmet Born from racing, the all-new X-12 combines Shoei's 50 years of helmet building experience with the very latest technology and most advanced materials to bring you the racing helmet of the future Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback Dual layer EPS liner enhances impact absorption and ventilation Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes Positioning and separation from the ventilation system maximize the Aero Edge Spoiler 2 aerodynamic properties Impact absorbing EPS liner throughout the entire chin bar Ventilation System Air Scoop 3 intake vent is positioned to maximize air volume into the helmet interior Top Outlet vent is separate from the Aero Edge Spoiler 2 allowing it to be positioned for optimum flow-through ventilation Racing inspired Side Extractor Vents combine with the chin bar lower air intake to reduce shield fogging and increase ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra-lightweight, rigid and resilient 3D Max-Dry Interior System The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Comfortable, Max-Dry helmet lining material quickly dissipates moisture within the helmet interior E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet, enabling the helmet to be more easily removed from the head Eyeglass compatible interior Standard Chin-Strap Clip Neatly secures chin strap CW-1 Shield and Q.R.S.A. System Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Optional, CWF-1 two-dimensional racing shields with tear-off posts are available Scratch-resistant coating 99.9% protection from harmful UV A & B rays Optional, CW-1 Pinlock? prepared shields are available to accommodate Pinlock? Fog Free Inserts A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop the shield open to increase airflow Shoei products can only be shipped to U.S. customers

X-Twelve Reverb Helmet $727.19 Shoei X-Twelve Reverb Helmet Born from racing, the all-new X-12 combines Shoei's 50 years of helmet building experience with the very latest technology and most advanced materials to bring you the racing helmet of the future Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback Dual layer EPS liner enhances impact absorption and ventilation Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes Positioning and separation from the ventilation system maximize the Aero Edge Spoiler 2 aerodynamic properties Impact absorbing EPS liner throughout the entire chin bar Ventilation System Air Scoop 3 intake vent is positioned to maximize air volume into the helmet interior Top Outlet vent is separate from the Aero Edge Spoiler 2 allowing it to be positioned for optimum flow-through ventilation Racing inspired Side Extractor Vents combine with the chin bar lower air intake to reduce shield fogging and increase ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra-lightweight, rigid and resilient 3D Max-Dry Interior System The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Comfortable, Max-Dry helmet lining material quickly dissipates moisture within the helmet interior E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet, enabling the helmet to be more easily removed from the head Eyeglass compatible interior Standard Chin-Strap Clip Neatly secures chin strap CW-1 Shield and Q.R.S.A. System Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Optional, CWF-1 two-dimensional racing shields with tear-off posts are available Scratch-resistant coating 99.9% protection from harmful UV A & B rays Optional, CW-1 Pinlock? prepared shields are available to accommodate Pinlock? Fog Free Inserts A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop the shield open to increase airflow Shoei products can only be shipped to U.S. customers

X-Twelve Bautista Helmet $755.99 Shoei X-Twelve Bautista Helmet Born from racing, the all-new X-12 combines Shoei's 50 years of helmet building experience with the very latest technology and most advanced materials to bring you the racing helmet of the future Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback Dual layer EPS liner enhances impact absorption and ventilation Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes Positioning and separation from the ventilation system maximize the Aero Edge Spoiler 2 aerodynamic properties Impact absorbing EPS liner throughout the entire chin bar Ventilation System Air Scoop 3 intake vent is positioned to maximize air volume into the helmet interior Top Outlet vent is separate from the Aero Edge Spoiler 2 allowing it to be positioned for optimum flow-through ventilation Racing inspired Side Extractor Vents combine with the chin bar lower air intake to reduce shield fogging and increase ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra-lightweight, rigid and resilient 3D Max-Dry Interior System The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Comfortable, Max-Dry helmet lining material quickly dissipates moisture within the helmet interior E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet, enabling the helmet to be more easily removed from the head Eyeglass compatible interior Standard Chin-Strap Clip Neatly secures chin strap CW-1 Shield and Q.R.S.A. System Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Optional, CWF-1 two-dimensional racing shields with tear-off posts are available Scratch-resistant coating 99.9% protection from harmful UV A & B rays Optional, CW-1 Pinlock? prepared shields are available to accommodate Pinlock? Fog Free Inserts A pre-set lever can easily lock the shield in place to prevent the shield from opening unexpectedly, as well as prop the shield open to increase airflow Shoei products can only be shipped to U.S. customers

San Diego Chargers 5/8 Sterling Silver Helmet Logo on Black Leather Money Clip $48.08 Enjoy this official NFL licensed San Diego Chargers money clip. A great gift for any San Diego Chargers fan!Express your team pride with men's football accessories from LogoArt®.The sterling silver San Diego Chargers logo is:Custom-made and captured in expensive metal molds for optimum detailRhodium plated to provide a beautiful lasting finishHand polished to a brilliant shine, then affixed to the leather money clipTeam the money clip up with a matching key chain. Browse all of our NFL watches too! Other jewelry items are also available for the San Diego Chargers.

San Diego Chargers 5/8 Sterling Silver Helmet Logo on Black Leather Money Clip / Credit Card Holder $51.92 Enjoy this official NFL licensed San Diego Chargers money clip. A great gift for any San Diego Chargers fan!Express your team pride with men's football accessories from LogoArt®.The sterling silver San Diego Chargers logo is:Custom-made and captured in expensive metal molds for optimum detailRhodium plated to provide a beautiful lasting finishHand polished to a brilliant shine, then affixed to the leather money clip/credit card holderTeam the money clip up with a matching key chain. Browse all of our NFL watches too! Other jewelry items are also available for the San Diego Chargers.

San Diego Chargers 5/8 Sterling Silver Helmet Logo on Nickel Plated Money Clip $44.23 Enjoy this official NFL licensed San Diego Chargers money clip. A great gift for any San Diego Chargers fan!Express your team pride with men's football accessories from LogoArt®.The sterling silver San Diego Chargers logo is:Custom-made and captured in expensive metal molds for optimum detailRhodium plated to provide a beautiful lasting finishHand polished to a brilliant shine, then affixed to the nickel plated money clipTeam the money clip up with a matching key chain. Browse all of our NFL watches too! Other jewelry items are also available for the San Diego Chargers.

San Diego Chargers 5/8 Gold Plated Helmet Logo on Gold Plated Money Clip $48.08 Enjoy this official NFL licensed San Diego Chargers money clip. A great gift for any San Diego Chargers fan!Express your team pride with men's football accessories from LogoArt®.The gold plated San Diego Chargers logo is:Custom-made and captured in expensive metal molds for optimum detailGold plated to provide a beautiful lasting finishHand polished to a brilliant shine, then affixed to the gold plated money clipTeam the money clip up with a matching key chain. Browse all of our NFL watches too! Other jewelry items are also available for the San Diego Chargers.

Ovation Competitor Helmet Medium/Large Black $67.95 Ovation™ Competitor Helmet Lightweight low-profile helmets from Ovation™! Velvet texture flocked shell Easy adjust dial for a snug fit Extra strong adjustment teeth for added helmet life High flow vents to keep you cool Removable Coolmax washable liner-rounded fixed visor Exclusive YKK(R) adjuster clip and buckle are positioned to stay off of the rider's face for comfort SEI certified to ASTM F1163-04A & CE certified to European EN 1384 Standards

Ovation Competitor Helmet Small/Medium Black $67.95 Ovation™ Competitor Helmet Lightweight low-profile helmets from Ovation™! Velvet texture flocked shell Easy adjust dial for a snug fit Extra strong adjustment teeth for added helmet life High flow vents to keep you cool Removable Coolmax washable liner-rounded fixed visor Exclusive YKK(R) adjuster clip and buckle are positioned to stay off of the rider's face for comfort SEI certified to ASTM F1163-04A & CE certified to European EN 1384 Standards

Sterling Silver Cyclist Helmet Charm $60.24 Accentuate your favorite charm bracelet with a cyclist helmet charmJewelry is designed in gleaming sterling silverSilver charm features an openwork cyclist helmet designcharm features a clip on clasp that can be applied to any bracelet or chainWeighs 2.2 gramsMeasures 10.9 mm long x 16.6 mm wide x 6 mm thickAll weights and measurements are approximate and may vary slightly from the listed information. See Treatment Guide for further information.

Shoei Qwest White Helmet $330.29 Shoei Qwest White Helmet. Aerodynamic Shell Design -Aerodynamic properties are maximized wind tunnel and -Dual Layer EPS liner enhances impact absorption and ventilation -Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes -Molded air spoiler to reduce drag and lift as well as diminish weight pressure on the neck while riding at high speeds Ventilation System -Upper Air Intake Vent is positioned tomaximize air volume into the helmet interior -Large upper intake vent positioned to maximize performance in high wind conditions -Easy to operate large lower intake vent -Lower air intake/defroster vent reduces shield fogging and increases ventilation -The rear/neck outlets allow for effective air exhaust -Breath guard and chin curtain included -Lightweight Advanced Integrated Matrix Plus (AIM+) -High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight rigid and resilient Interior System -3-D center pad and multi-layered polyurethane foam cheek pads -Cheek pads are replaceable or removable for maintenance -Eyeglass compatible interior -Standard Chin-Strap Clip -Neatly secures chin strap -CW-1 Shield and Q.R.S.A. System -Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal -The CW-1 three-dimensionally curved shield is both wider and taller than the CX-1V it replaces -Optional CWF-1 two-dimensional Pinlock® equipped racing shields with tear-off posts are available -Scratch-resistant coating -99.9% protection from harmful UV A & B rays -Optional CW-1 Pinlock® prepared shields are available to accommodate Pinlock -Fog Free Inserts -A pre-set lever can easily lock the shield in place to prevent the shield from openingunexpectedly as well as prop the shield open to increase airflow

Shoei Qwest Black Helmet $330.29 Shoei Qwest Black Helmet. Aerodynamic Shell Design -Aerodynamic properties are maximized wind tunnel and -Dual Layer EPS liner enhances impact absorption and ventilation -Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes -Molded air spoiler to reduce drag and lift as well as diminish weight pressure on the neck while riding at high speeds Ventilation System -Upper Air Intake Vent is positioned tomaximize air volume into the helmet interior -Large upper intake vent positioned to maximize performance in high wind conditions -Easy to operate large lower intake vent -Lower air intake/defroster vent reduces shield fogging and increases ventilation -The rear/neck outlets allow for effective air exhaust -Breath guard and chin curtain included -Lightweight Advanced Integrated Matrix Plus (AIM+) -High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight rigid and resilient Interior System -3-D center pad and multi-layered polyurethane foam cheek pads -Cheek pads are replaceable or removable for maintenance -Eyeglass compatible interior -Standard Chin-Strap Clip -Neatly secures chin strap -CW-1 Shield and Q.R.S.A. System -Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal -The CW-1 three-dimensionally curved shield is both wider and taller than the CX-1V it replaces -Optional CWF-1 two-dimensional Pinlock® equipped racing shields with tear-off posts are available -Scratch-resistant coating -99.9% protection from harmful UV A & B rays -Optional CW-1 Pinlock® prepared shields are available to accommodate Pinlock -Fog Free Inserts -A pre-set lever can easily lock the shield in place to prevent the shield from openingunexpectedly as well as prop the shield open to increase airflow

Shoei Qwest Anthracite Helmet $349.19 Shoei Qwest Anthracite Helmet . Aerodynamic Shell Design -Aerodynamic properties are maximized wind tunnel and -Dual Layer EPS liner enhances impact absorption and ventilation -Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes -Molded air spoiler to reduce drag and lift as well as diminish weight pressure on the neck while riding at high speeds Ventilation System -Upper Air Intake Vent is positioned tomaximize air volume into the helmet interior -Large upper intake vent positioned to maximize performance in high wind conditions -Easy to operate large lower intake vent -Lower air intake/defroster vent reduces shield fogging and increases ventilation -The rear/neck outlets allow for effective air exhaust -Breath guard and chin curtain included -Lightweight Advanced Integrated Matrix Plus (AIM+) -High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight rigid and resilient Interior System -3-D center pad and multi-layered polyurethane foam cheek pads -Cheek pads are replaceable or removable for maintenance -Eyeglass compatible interior -Standard Chin-Strap Clip -Neatly secures chin strap -CW-1 Shield and Q.R.S.A. System -Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal -The CW-1 three-dimensionally curved shield is both wider and taller than the CX-1V it replaces -Optional CWF-1 two-dimensional Pinlock® equipped racing shields with tear-off posts are available -Scratch-resistant coating -99.9% protection from harmful UV A & B rays -Optional CW-1 Pinlock® prepared shields are available to accommodate Pinlock -Fog Free Inserts -A pre-set lever can easily lock the shield in place to prevent the shield from openingunexpectedly as well as prop the shield open to increase airflow

Burton R.E.D Adult Theory Helmet Black Small $119.95 R.E.D. Adult Size Chart 53-55cm XS 55-57cm Small 57-59cm Medium 59-61cm Large 61-63cm XL 63-65cm XXL The R.E.D. Theory adult snowboard and ski helmet is an ultra lightweight, audio-compatible snowboard helmet with an in-mold polycarbonate shell. The R.E.D. Theory snowboard helmet is packed with R.E.D. tech features, including rider-controlled venting that seals out the elements and also allows you to adjust airflow for custom comfort. R.E.D.s MC2 mechanical fit and comfort system allows you to fine-tune your fit. The removable Goggle Gasket eliminates gaper gap between your goggles and the helmet, making the helmet windproof and breathable. The R.E.D. theory is audio-compatible. Add optional Audex audio ear pads, plug into any iPod, MP3, CD or tape player and youre set to go. Features: Ultra-lightweight in-molded polycarbonate shell Hidden, integrated rider-controlled venting Updated MC2 mechanical fit and comfort system Removable goggle clip Removable goggle gasket Audio/subwoofer ear pad accessory compatible Zip Clip™ ratcheting chin buckle ASTM 2040/CE 1077 certified in EU R.E.D. products are only available for shipment within the United States. If you need help on R.E.D. sizes, please see the R.E.D. Sizing Chart.

Burton R.E.D Adult Theory Helmet White Large $119.95 R.E.D. Adult Size Chart 53-55cm XS 55-57cm Small 57-59cm Medium 59-61cm Large 61-63cm XL 63-65cm XXL The R.E.D. Theory adult snowboard and ski helmet is an ultra lightweight, audio-compatible snowboard helmet with an in-mold polycarbonate shell. The R.E.D. Theory snowboard helmet is packed with R.E.D. tech features, including rider-controlled venting that seals out the elements and also allows you to adjust airflow for custom comfort. R.E.D.s MC2 mechanical fit and comfort system allows you to fine-tune your fit. The removable Goggle Gasket eliminates gaper gap between your goggles and the helmet, making the helmet windproof and breathable. The R.E.D. theory is audio-compatible. Add optional Audex audio ear pads, plug into any iPod, MP3, CD or tape player and youre set to go. Features: Ultra-lightweight in-molded polycarbonate shell Hidden, integrated rider-controlled venting Updated MC2 mechanical fit and comfort system Removable goggle clip Removable goggle gasket Audio/subwoofer ear pad accessory compatible Zip Clip™ ratcheting chin buckle ASTM 2040/CE 1077 certified in EU R.E.D. products are only available for shipment within the United States. If you need help on R.E.D. sizes, please see the R.E.D. Sizing Chart.

Burton R.E.D Adult Theory Helmet White Small $119.95 R.E.D. Adult Size Chart 53-55cm XS 55-57cm Small 57-59cm Medium 59-61cm Large 61-63cm XL 63-65cm XXL The R.E.D. Theory adult snowboard and ski helmet is an ultra lightweight, audio-compatible snowboard helmet with an in-mold polycarbonate shell. The R.E.D. Theory snowboard helmet is packed with R.E.D. tech features, including rider-controlled venting that seals out the elements and also allows you to adjust airflow for custom comfort. R.E.D.s MC2 mechanical fit and comfort system allows you to fine-tune your fit. The removable Goggle Gasket eliminates gaper gap between your goggles and the helmet, making the helmet windproof and breathable. The R.E.D. theory is audio-compatible. Add optional Audex audio ear pads, plug into any iPod, MP3, CD or tape player and youre set to go. Features: Ultra-lightweight in-molded polycarbonate shell Hidden, integrated rider-controlled venting Updated MC2 mechanical fit and comfort system Removable goggle clip Removable goggle gasket Audio/subwoofer ear pad accessory compatible Zip Clip™ ratcheting chin buckle ASTM 2040/CE 1077 certified in EU R.E.D. products are only available for shipment within the United States. If you need help on R.E.D. sizes, please see the R.E.D. Sizing Chart.

Bern Brentwood Helmet Yellow Yellow X-Large $89.95 Bern Size Chart 52-53.5 cm XS 53.5-55.5 cm Small 55.5-57 cm Medium 57-59 cm Large 59-60.5 cm XL 60.5-62 cm XXL 62-63.5 cm XXXL The Bern Brentwood Skate, Bike and BMX Helmet is a lightweight, vented multi-sport helmet with a low-profile design. You can upgrade your Bern Brentwood and use it for snow sports with Bern’s optional liner system. Bern Zip Mold technology has a higher strength-to-weight ratio, making this a very light helmet. Zip Mold technology is engineered and tested to pass applicable standards including EN 1078 for biking, ASTM 2040 for snow sports, and CPSC for biking and skateboarding. Features Multiple non-motorized land and snow sports helmet Channeled Airflow sucks air through front vents and channels air through the helmet and out the back Liner System. Winter to summer snap in knit liner system Sunglass/Eyeglass channels make wearing glasses more comfortable Twin Clip: Removable/customable Goggle Clip Sink Fit: A low profile surround fit and feel Engineered and tested to pass the EN 1078, CPSC, and ASTM 2040 Standard Specifications for Helmets

X-Twelve Kagayama 3 Helmet $619.95 Shoei X-Twelve Kagayama 3 Helmet Since its introduction in 2003, the X-Eleven has been the motorcycle-racing helmet that all others are judged by. For this year's model, Shoei engineers were faced with the grueling task of improving on what is already considered to be the best-performing racing helmet ever conceived. Born from racing, the all-new X-Twelve combines Shoei's 50 years of helmet building experience with the very latest technology and most advanced materials to bring you the racing helmet of the future. Throughout its history, Shoei has relied on feedback from professional racers around the globe to continually improve its products, and everything learned along the way has now culminated in the finest motorcycle racing helmet ever developed-the all-new X-12! Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel testing and professional riders' feedback Dual layer EPS liner enhances impact absorption and ventilation Five shell and six EPS liner sizes present increased fit options that help to comfortably fit most head sizes Positioning and separation from the ventilation system maximize the Aero Edge Spoiler 2 aerodynamic properties Impact absorbing EPS liner throughout the entire chin bar Ventilation System Air Scoop 3 intake vent is positioned to maximize air volume into the helmet interior Top Outlet vent is separate from the Aero Edge Spoiler 2 allowing it to be positioned for optimum flow-through ventilation Racing inspired Side Extractor Vents combine with the chin bar lower air intake to reduce shield fogging and increase ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Lightweight, Advanced Integrated Matrix Plus (AIM+) High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient 3D Max-Dry Interior System The entire interior lining (cheek pads, upper liner and chin strap covers) is easily removed to allow for cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Comfortable, Max-Dry helmet lining material quickly dissipates moisture within the helmet interior E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet, enabling the helmet to be more easily removed from the head Eyeglass compatible interior Standard Chin-Strap Clip Neatly secures chin strap CW-1 Shield and Q.R.S.A. System Q.R.S.A. (Quick-Release Self-Adjusting) base plate allows for tool-less shield removal and installation. The springloaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly and ensures a proper seal The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Optional, CWF-1 two-dimensional ra

KBA 4 Pack Inflating Needles - Helmet $1.99 Helmet - Helmet

Roman Helmet $149.99 Roman Helmet

Fire helmet $29.99 Fire helmet

Viking Helmet $29.99 Viking Helmet

Wilson Helmet $10 Wilson Helmet

Colored Helmet $6 Colored Helmet

football and helmet $6 football and helmet

Giro Shiv Snow Helmet Matte Black Small $99.95 Giro Adult Size Chart Small 52 - 55.5cm Medium 55.5 - 59cm Large 59 - 62.5cm The Giro Shiv ski and snowboard helmet is the ultimate park and pipe helmet. The Giro Shiv is a lightweight, low-profile helmet that was developed in conjunction with Giro pro riders. The Shiv features Giros new Mag Clip goggle retainer, two magnets embedded in the helmets shell that work with a removable goggle clip to provide a goggle clip thats only there when you need it. The Shiv ski and snowboard helmet includes Giros new interior subliner, which allows you to customize your pads or pull them out completely for the ultimate tuned-in fit. The Giro Shivo is an in-mold construction helmet with an EPS liner. The EPS liner absorbs more impact energy, gram for gram, than any other liner material. The Giro Shiv includes 8 Super Cool vents that pull cool, fresh air into the helmet while pushing heat and stale air out. The Super Cool vents allow you to regulate your core temperature, so you stay comfortable and feel fresh all day. The Shiv is audio compatible, so you can upgrade to any Giro TuneUps audio system and enjoy exceptional sound quality while you ski and ride. Features: In-mold shell/EPS Liner Mag Clip goggle retainer Interior subliner 8 Super Cool vents Compliance: CE prEN1077 Audio compatible Audio Accessory Optional Upgrades: TuneUps™ Wireless with Bluetooth® Wireless Technology: Wireless speakers. TuneUps™ with Bluetooth LINK: Allows you to hard-line jack into your music player while connecting to your Bluetooth-enabled phone wirelessly. TuneUps™ 2-Way Radio: Allows you to hard-line into your music player and 2-way radio at the same time. TuneUps™ Audio System: Great stereo sound. In-line mute button.

Shoei VFX-W Malice Yellow Off-Road Helmet $552.59 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Shoei VFX-W Malice Black Off-Road Helmet $552.59 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Shoei VFX-W Malice Orange Off-Road Helmet $552.59 Shoei's extensive experience in off-road helmet design and manufacturing has led to the creation of a new standard in off-road helmets the VFX-W. The aggressive shell design allows for a lightweight off-road helmet that offers incredible protection form-fitting comfort cooling ventilation and components that are easy to care for.. Also Included: Unique chin strap clip keeps strap from flapping in the wind Ergonomically shaped mud guard Helmet sack constructed of soft velvety fabric with drawstring closure

Ovation Deluxe Schooler Helmet Medium/Large Dark G $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Ovation Deluxe Schooler Helmet Small/Medium Dark G $54.95 Ovation™ Deluxe Schooler Helmet This lightweight low-profile helmet is the perfect schooling helmet. Easy adjust dial for a snug fit. Features a rubberized finish, removable washable liner, removable breakaway visor, and exclusive YKK(R) adjuster clip and buckle designed to stay off the rider's face for comfort. SEI certified to ASTM F1163-04A and CE Certified to European EN 1384 Standards. 14.4 oz. Sizes: S/M (6 1/2 - 7), M/L (7 1/8 - 7 5/8)

Burton R.E.D Adult Hi-Fi Helmet White Tie Dye Large $99.95 R.E.D. Adult Size Chart 53-55cm XS 55-57cm Small 57-59cm Medium 59-61cm Large 61-63cm XL 63-65cm XXL The R.E.D. Hi-Fi Snowboarding and Ski Helmet is a low-profile, audio-compatible in-mold helmet, with a lightweight shell and sleek design. The Hi-Fi is one of the lightest snowboard helmets on the market! The R.E.D. Hi-Fi helmet features a removable goggle gasket that lets you get the tight fit you need. R.E.D. Quick-Clip Earpads mount in the center of the EPS liner to maximize stability and minimize the width of the helmet. The Zip Clip ratcheting chin buckle allows you to make adjustments in seconds without removing your helmet. The R.E.D. Hi-Fi snowboard helmet is audio compatible. Add optional Audex audio ear pads, plug into any iPod, MD, CD or tape player, and youre set with DJ-quality sound. Features: Removable goggle gasket Audex ear pad accessory compatible Ultra lightweight in-molded polycarbonate shell Quick Clip ear pads Vent vesh Zip Clip ratcheting chin buckle ASTM 2040/CE 1077 certified R.E.D. products are only available for shipment within the United States. If you need help on R.E.D. sizes, please see the R.E.D. Sizing Chart.

This entry was posted on Thursday, May 13th, 2010 at 10:03 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.